Polyurethane construction: Withstand frequent sessions and deliver longevity as you train legs, back, and core.
2 in bar opening: Reduce bar friction to move faster between sets as you train leg...
Bar Type: Multi
Bar Weight: 45 lbs
Bar Length: 7 ft
Diameter: 28.5 mm
Knurl: Medium
Shaft Coating: Black Zinc
Sleeve Coating: Chrome
Bushing/Bearing: Bronze Bushing
Tens...
IPF competition approved 20kg bar with powerlifting knurl marks at 32 in, aggressive knurling and center knurl for a secure grip on squat, bench, and deadlift
200,000+ PSI tensile strength and 2,0...
Matte-black powder coat: Resist wear and the elements to withstand daily training in home or commercial gyms.
Raised silver lettering: Improve plate identification to set up workouts faster and ...
Needle bearings and brass bushings: Deliver smooth sleeve spin to perform snatch, clean & jerk, and presses, and keep bar turnover quick for Olympic lifts.
188,000 PSI tensile strength: With...
Short, thick 62 in length, 2 in diameter: Distribute load to improve hip comfort and stability and support greater glute activation.
1000 lb tested capacity: Withstand demanding hip thrust train...
Snap on pad: Provide added comfort during training and improve set up for home gyms and daily sessions alike.
Lighter than original: Move the bar with confidence and support smaller athletes acr...
Matte-black powder coat: Provide long-term corrosion protection and keep plates looking sharp in busy gyms.
Deep lip design: Improve grip to move, load, and store plates between sets for squats,...
No-assembly design: Set up fast and train immediately, perfect for circuits or warm-ups at home or in studios
Breathable padded foam: Ensure a secure grip with sweaty hands to train shoulders, le...
Ceramic Coated steel: Resist wear and keep the bar looking new while you train back, legs, and core.
190,000 psi tensile strength, 1,500 lb capacity: Withstand heavy squats and deadlifts to buil...
700 lb capacity: Withstand heavy deadlift cycles and provide confidence as you build strength in legs and hips.
28 mm handles, medium knurling: Ensure stable pulls and target legs and glutes whi...
Robust thermoplastic: Ensure plates stay put so you perform heavy squats to train legs and improve bar path stability.
Clamp-style design: Deliver simple, reliable plate retention to support ben...
47 in EZ curl design: Target biceps and triceps to build arm strength and size during curls and extensions.
Medium-depth knurling: Provide a firm, comfortable grip to keep sets stable and target...
10 lb Bar Weight: Provides lightweight portability for home or gym use, supporting versatile training routines.
48-Inch Length: Offers ample space for various exercises, allowing users to target...
Olympic Size: Fits all standard racks for versatile strength training.
Rotating Ends: Ensure smooth movement and reduce wrist strain.
Knurled Grip: Provides secure hold for bench presses and ro...
Thick Pads: Provide comfort and reduce shoulder strain during intense squat sessions.
Quality Handles: Ensure a secure grip, enhancing control and stability for safe lifting.
Heavy-Duty Constru...
Color-coded 10–55 lb plates: Provide quick weight ID and train Olympic lifts to build legs, back, and core in home, light-commercial, or box gyms.
Heavy-duty synthetic rubber: Several inches ove...
Durable rubber construction: Withstand drops and keep floors intact as you train legs, back, and core
Low-bounce design: Ensure control during drops and keep noise down as you perform Olympic lif...
Heavy-duty steel pair: Withstand repeated training and provide long-term use in home, box, or competition.
1 in knurled handle with guide mark: Improve grip, build forearms, and support chalk du...
Polyurethane-coated steel: Resist wear and provide long service to support daily chest, back, and leg training.
3-handle ergonomic grip: Move and store plates to keep hands secure and improve se...
Urethane construction: Withstand repeated drops and deliver long-term value for daily strength training.
Consistent dead bounce: Keep floors and barbells protected during drops as you train snatc...
Heavy-duty steel, powder coat: Withstand tough strongman training and resist wear during repeated log presses.
Neutral grip, 6 in from edge, 24.4 in apart: Perform presses that support shoulder ...
12-gauge steel frame: Withstand heavy bench, row, and curl sets for chest, back, and biceps as grooved sleeves keep plates steady
Six grip options: Improve shoulder comfort and target chest, tri...
0.5 lb plates: Ensure safe starts for kids and beginners as you train bar path, grip, and timing.
Nylon-based padding: Provide safe, low-load practice on squats to strengthen legs and core.
Sta...
Select a bar and weight set: Build strength in legs, back, and chest while progressing loads to match your training.
155 lb set (2) 45 lb, (4) 10 lb, (4) 5 lb, (2) 2.5 lb: Train legs and back wi...
html
28 mm EZ curl bar: Target biceps at different angles and improve intensity with alternating hand positions.
400 lb capacity: Withstand heavy sets and provide room to progress as you train c...
Material: Premium virgin rubber and solid steel core withstand hard training and provide long-lasting use.
Weight Range: 0.5 kg to 5 kg increments expand microloading to target squat, bench, and ...
Material: High-quality virgin rubber over a solid steel core to deliver durability and support steady training.
Weight Range: In 0.5, 1, 1.25, 2.5, 5, and 10 lb to build strength gradually and s...
Classic design: Provide dependable free-weight training to build legs, back, chest, and core strength.
Solid craftsmanship: Withstand daily training and ensure long-term performance during press...
Built to Last: Tested with 20,000 drops from 8 ft to withstand heavy training and support legs, back, and core.
Wear Resistant: Proprietary rubber blend resists cracking and chipping to provide ...
Heavy-Duty Capacity: Supports up to 1500 lbs and 185,000 psi to withstand max loads and train back, legs, core.
Premium Construction: 45# carbon steel, Cerakote shaft, and brass bushings deliver...
CPU Urethane Coating: Ensure exceptional longevity to support daily training and frequent plate changes.
Tri-Grip Handles: Move and set up plates between sets to target legs, back, chest, and arm...
Curved EZ curl design: Ensure neutral wrists to target biceps and triceps and improve comfort.
400 lb capacity: Withstand progressive loading to build biceps and triceps strength through heavy s...
Engineered for Precision: Deliver consistent training loads with tolerance equal to two nickels to ensure accurate progression in programs.
Proven Durability: Withstand 30,000 drops from 8 ft to ...
± 10 g accuracy: Ensure precise loading to train squat, bench, and deadlift with repeatable progress.
50 mm center hole: Ensure a secure barbell fit to perform heavy singles and volume sets duri...
Within the Weight of Two Nickels: Ensure precise loading to train back, legs, and core with consistent progress.
Drop-Tested 30,000 Times: Withstand 8 ft drops to support high-volume Olympic lift...
Two Nickel Weight Tolerance: Ensure precise loading beyond IWF ±0.8% to train consistent progress in squats, pulls, and presses.
Superior Quality Virgin Rubber: Provide impact resistance to withs...
190,000 PSI: Withstand heavy squats, pulls, and presses to strengthen legs, back, and shoulders for long-term training cycles.
Eight Needle Bearings: Provide smooth rotation to perform snatches a...
Recessed tri-grip handles at 10, 2, 6: Improve handling to move plates from flat floors and set up lifts.
Rubber-encased with stainless-steel flange: Ensure a snug bar fit and improve loading dur...
